Find the right connection between field interfaces and system protocols.
Filters use documented product information. Unspecified capabilities are excluded. Confirm protocol roles, device models, point counts and site conditions before ordering.
Supports field-data acquisition and MQTT integration, with acquisition and forwarding configured from the device point list to connect serial or network devices to supervisory platforms. Provides 2 Ethernet ports, 2 serial ports, 512-point capacity. Acquisition protocols: Modbus RTU, Modbus TCP; a Simulator driver is also included.
Organizes field-device data into browser-based HMI screens for building or industrial monitoring and provides interfaces for other supervisory systems. Provides 1 Ethernet port, 1 serial port, 256-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device. This model supports WiFi.
Converts field-controller and meter data into BACnet interfaces for point-list-based integration with building management systems. Provides 2 Ethernet ports, 4 serial ports, 1024-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device.
Combines field-device communications with web SCADA editing and monitoring, organizing device points, screens and the documented data sources within a project. Provides 2 Ethernet ports, 4 serial ports, 2048-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device. This page covers the RK3568 hardware edition.
Integrates water, heat and other meter data into MQTT systems. Configure the MBus wiring, acquisition driver and supply for the selected edition. Select the matching hardware edition below.
Connects MBus water or heat meters to a PC or USB-equipped gateway for reading and commissioning. It supports the listed CJ188 and EN1434 standards and uses USB 5 V power.
Provides 16 configurable universal I/O ports for PLC or DDC field-signal expansion over Modbus RTU. Assign each port to its required function; the 16 universal ports are not four independent banks of I/O.
Combines local digital or analog terminals with Modbus and BACnet device communications for gateway-style DDC applications requiring both field I/O and supervisory integration. Provides 1 Ethernet port, 1 serial port, 8 DI, 4 DO, 256-point capacity. Acquisition protocols: Modbus, BACnet; a Simulator driver is also included.
Organizes field-device data into browser-based HMI screens for building or industrial monitoring and provides interfaces for other supervisory systems. Provides 2 Ethernet ports, 4 serial ports, 1024-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device. This model supports 4G.
Expands PLC or DDC field I/O over Modbus RTU with 16 DI, connecting digital signals to the control system.
Integrates water, heat and other meter data into Modbus systems. Configure the MBus wiring, acquisition driver and supply for the selected edition. Select the matching hardware edition below.
Organizes field-device data into browser-based HMI screens for building or industrial monitoring and provides interfaces for other supervisory systems. Provides 2 Ethernet ports, 6 serial ports, 2048-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device.
