Connect devices. Unlock data.sales@opcmaster.com / +86 21 58776098
Sunfull — Industrial automation and connectivity
Contact
Home/Products
SUNFULL / PRODUCTS

Products

Find the right connection between field interfaces and system protocols.

PRODUCT FINDER

Find your connection

Select multiple protocols or enter your own. Results must meet every selected requirement.

01 / Device / acquisition protocol
Select protocols · multiple
A–Z order · Search keeps list numbers

Names are from the supplied acquisition protocol list.

Showing all 579 protocols

02 / System / forwarding protocol
1 selected
A–Z order · Search keeps list numbers

Names are from documented product forwarding protocols.

Showing all 19 protocols

BACnet/IP

Select physical interfaces separately from acquisition protocols. CAN, KNX TP and two-wire MBus ports have independent counts; protocol support does not establish a physical port.

DDC I/O and touchscreenRefine by product type

When a touchscreen is required, results must have a built-in touchscreen and meet all I/O counts. Otherwise, positive I/O counts select DDC controllers. Counts are minimum requirements. HMI configuration support does not imply a built-in screen.

Power and wireless connectivityAdditional requirements

Checked requirements match only confirmed capabilities. Review product notes for optional modules, shared ports and power conditions.

Filters use documented product information. Unspecified capabilities are excluded. Confirm protocol roles, device models, point counts and site conditions before ordering.

5 results

Current selection conditions

Select a condition to remove it. Multiple protocols still require an AND match.

Clear all selection conditions
HMI2000-Scada
HMI Gateway

HMI2000-Scada

Combines field-device communications with web SCADA editing and monitoring, organizing device points, screens and the documented data sources within a project. Provides 2 Ethernet ports, 2048-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device.

RS485 ports0RS232 ports0Ethernet ports2 portsSerial ports0
HMI configurationBACnet/IPModbus TCPMQTT
Why this matches
  • Forwarding protocolsBACnet/IP

Confirm communication roles, capacity and installation conditions.

HMI2000-Lite-E
HMI Gateway

HMI2000-Lite-E

Supports field-data acquisition and MQTT integration, with acquisition and forwarding configured from the device point list to connect serial or network devices to supervisory platforms. Provides 2 Ethernet ports, 512-point capacity. Acquisition protocols: Modbus TCP; a Simulator driver is also included.

RS485 ports0RS232 ports0Ethernet ports2 portsSerial ports0
Listed protocols · Modbus TCP / SimulatorBACnet/IPModbus TCPMQTT
Why this matches
  • Forwarding protocolsBACnet/IP

Confirm communication roles, capacity and installation conditions.

HMI2000-ARM-E
HMI Gateway

HMI2000-ARM-E

Organizes field-device data into browser-based HMI screens for building or industrial monitoring and provides interfaces for other supervisory systems. Provides 2 Ethernet ports, 512-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device.

RS485 ports0RS232 ports0Ethernet ports2 portsSerial ports0
HMI configurationBACnet/IPModbus TCPMQTT
Why this matches
  • Forwarding protocolsBACnet/IP

Confirm communication roles, capacity and installation conditions.

HMI1002-ARM
HMI Gateway

HMI1002-ARM

Browser-based HMI monitoring for building and industrial equipment, with 1 Ethernet port, 2 serial ports, 512 points and up to 64 devices. Connect the collected data to supervisory systems through BACnet/IP, BACnet MS/TP, Modbus, MQTT or OPC UA.

RS485 ports2 portsRS232 ports0Ethernet ports1 portsSerial ports2 ports
HMI configurationFull acquisition list coverageBACnet/IPBACnet MS/TPModbus
Why this matches
  • Forwarding protocolsBACnet/IP

Confirm communication roles, capacity and installation conditions.

HMI1002-Lite
HMI Gateway

HMI1002-Lite

Organizes field-device data into browser-based HMI screens for building or industrial monitoring and provides interfaces for other supervisory systems. Provides 1 Ethernet port, 2 serial ports, 512-point capacity. Acquisition protocols: Modbus, BACnet; a Simulator driver is also included.

RS485 ports2 portsRS232 ports0Ethernet ports1 portsSerial ports2 ports
HMI configurationBACnet/IPBACnetModbus
Why this matches
  • Forwarding protocolsBACnet/IP

Confirm communication roles, capacity and installation conditions.