Products | SUNFULL

PRODUCT FINDER

Find your connection

Select multiple protocols or enter your own. Results must meet every selected requirement.

Physical interfacesSerial ports (minimum)Ethernet ports (at least)RS485 ports (at least)RS232 ports (at least)CAN ports (minimum)KNX TP ports (minimum)Two-wire MBus ports (minimum)

Select physical interfaces separately from acquisition protocols. CAN, KNX TP and two-wire MBus ports have independent counts; protocol support does not establish a physical port.

DDC I/O and touchscreenRefine by product type

DI digital inputsDO digital outputsAI analog inputsAO analog outputs

Built-in touchscreen required

When a touchscreen is required, results must have a built-in touchscreen and meet all I/O counts. Otherwise, positive I/O counts select DDC controllers. Counts are minimum requirements. HMI configuration support does not imply a built-in screen.

Power and wireless connectivityAdditional requirements

Require Type-C powerRequire 4GRequire WiFiRequire LoRaWAN

Checked requirements match only confirmed capabilities. Review product notes for optional modules, shared ports and power conditions.

Filters use documented product information. Unspecified capabilities are excluded. Confirm protocol roles, device models, point counts and site conditions before ordering.

4 results

Current selection conditions

Select a condition to remove it. Multiple protocols still require an AND match.

System / forwarding protocol: KNX IP

Clear all selection conditions

KNX Gateway

KNX2004-ARM

Integrates lighting and control-device data into KNX IP systems, with the documented logic and timing functions for lighting scenes. Check KNX IP and the physical KNX TP bus separately. Provides 2 Ethernet ports, 4 serial ports, 1024-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device.

RS485 ports4 portsRS232 ports0Ethernet ports2 portsSerial ports4 ports

KNX IPOPC UA

Why this matches

Forwarding protocolsKNX IP

Confirm communication roles, capacity and installation conditions.

KNX Gateway

KNX1002-ARM

Integrates lighting and control-device data into KNX IP systems, with the documented logic and timing functions for lighting scenes. Check KNX IP and the physical KNX TP bus separately. Provides 1 Ethernet port, 2 serial ports, 512-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device. This model supports Type-C power.

RS485 ports2 portsRS232 ports0Ethernet ports1 portsSerial ports2 ports

KNX IPOPC UA

Why this matches

Forwarding protocolsKNX IP

Confirm communication roles, capacity and installation conditions.

KNX Gateway

KNX2004-A9

Integrates lighting and control-device data into KNX IP systems, with the documented logic and timing functions for lighting scenes. Check KNX IP and the physical KNX TP bus separately. Provides 2 Ethernet ports, 4 serial ports, 2048-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device.

RS485 ports4 portsRS232 ports0Ethernet ports2 portsSerial ports4 ports

KNX IPOPC UA

Why this matches

Forwarding protocolsKNX IP

Confirm communication roles, capacity and installation conditions.

KNX1302-ARM

Customized products

KNX1302-ARM

Integrates lighting and control-device data into KNX IP systems, with the documented logic and timing functions for lighting scenes. Check KNX IP and the physical KNX TP bus separately. Provides 1 Ethernet port, 2 serial ports, 512-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device. This model supports Type-C power. This is a custom edition; confirm the delivery configuration against its own document.

RS485 ports2 portsRS232 ports0Ethernet ports1 portsSerial ports2 ports

KNX IPOPC UA

Why this matches

Forwarding protocolsKNX IP

Confirm communication roles, capacity and installation conditions.