
Equipment-room leak detection and alarm integration
A locating leak controller and sensing cable report alarms and leak locations to a monitoring host through the RS485 and RS232 interface path described in the original proposal.
Application solutions for buildings, lighting, industry, agriculture, power and data centers.

A locating leak controller and sensing cable report alarms and leak locations to a monitoring host through the RS485 and RS232 interface path described in the original proposal.

Three X2BACnet gateways collected Modbus electricity-meter data over RS485 and provided BACnet/IP data to Johnson Controls NAE controllers for Metasys monitoring.

A hardware gateway connected a T-Master 2.11 controller to a Modbus RTU touchscreen, enabling different temperature and humidity setpoints during the day and at night.

A documented proposal combining HMI2004-A9 gateways with a local energy platform for hospital metering and monitoring; no quantified acceptance or energy-saving result is supplied.

An aluminum manufacturer in Anqing used HMI1001-ARM-4G for production-equipment data collection and municipal-platform integration where no dedicated network had been planned.

Three HMI2004-Lite gateways collected Modbus RTU data from 14 Haier VRV groups and exposed BACnet/IP. The source records local HMI use while the BA network connection remained pending.

Connect chiller-plant field points, third-party equipment and a browser HMI using HMI2004-A9, BAC1002-ARM and DDC controllers. Explore the topology, configuration workflow and operating interface.

Combine digital-signage graphics with Modbus RTU sensor readings using HMI1004-HDMI and X2View, then view the HMI through an HDMI display or a browser.

Share one set of Modbus device data between independent RTU and TCP systems. The MOD2004-Lite example includes electricity-meter integration with Honeywell EBI and Elster Enacto.

Record noise-sensor data, track four alarm levels and drive an audible/visual alarm using HMI2004-A9 and Modbus RTU I/O in an animal-facility monitoring example.

Aggregate laboratory, HVAC and water-system data from three separate building networks at a headquarters using HMI2004-A9 gateways and MQTT.

A legacy BACnet building-integration diagram with general selection and commissioning guidance. The original notes do not identify a current model or provide verified project results.