Connect devices. Unlock data.sales@opcmaster.com / +86 21 58776098
Sunfull — Industrial automation and connectivity
Contact
Home/Products
SUNFULL / PRODUCTS

Products

Find the right connection between field interfaces and system protocols.

PRODUCT FINDER

Find your connection

Select multiple protocols or enter your own. Results must meet every selected requirement.

01 / Device / acquisition protocol
Select protocols · multiple
A–Z order · Search keeps list numbers

Names are from the supplied acquisition protocol list.

Showing all 579 protocols

02 / System / forwarding protocol
1 selected
A–Z order · Search keeps list numbers

Names are from documented product forwarding protocols.

Showing all 19 protocols

OPC UA

Select physical interfaces separately from acquisition protocols. CAN, KNX TP and two-wire MBus ports have independent counts; protocol support does not establish a physical port.

DDC I/O and touchscreenRefine by product type

When a touchscreen is required, results must have a built-in touchscreen and meet all I/O counts. Otherwise, positive I/O counts select DDC controllers. Counts are minimum requirements. HMI configuration support does not imply a built-in screen.

Power and wireless connectivityAdditional requirements

Checked requirements match only confirmed capabilities. Review product notes for optional modules, shared ports and power conditions.

Filters use documented product information. Unspecified capabilities are excluded. Confirm protocol roles, device models, point counts and site conditions before ordering.

4 results

Current selection conditions

Select a condition to remove it. Multiple protocols still require an AND match.

Clear all selection conditions
KNX2004-ARM
KNX Gateway

KNX2004-ARM

Integrates lighting and control-device data into KNX IP systems, with the documented logic and timing functions for lighting scenes. Check KNX IP and the physical KNX TP bus separately. Provides 2 Ethernet ports, 4 serial ports, 1024-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device.

RS485 ports4 portsRS232 ports0Ethernet ports2 portsSerial ports4 ports
KNX IPOPC UA
Why this matches
  • Forwarding protocolsOPC UA

Confirm communication roles, capacity and installation conditions.

KNX1002-ARM
KNX Gateway

KNX1002-ARM

Integrates lighting and control-device data into KNX IP systems, with the documented logic and timing functions for lighting scenes. Check KNX IP and the physical KNX TP bus separately. Provides 1 Ethernet port, 2 serial ports, 512-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device. This model supports Type-C power.

RS485 ports2 portsRS232 ports0Ethernet ports1 portsSerial ports2 ports
KNX IPOPC UA
Why this matches
  • Forwarding protocolsOPC UA

Confirm communication roles, capacity and installation conditions.

HMI1002-KNX-TP
KNX Gateway

HMI1002-KNX-TP

Reads and controls lighting and other KNX TP bus devices, with built-in web HMI functions and data interfaces for BACnet, Modbus, OPC UA and MQTT systems. Provides 1 Ethernet port, 1 serial port, 1 KNX TP port, 512-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device. This model supports Type-C power.

RS485 ports1 portsRS232 ports0Ethernet ports1 portsSerial ports1 portsKNX TP ports1 ports
HMI configurationModbusBACnetMQTT
Why this matches
  • Forwarding protocolsOPC UA

Confirm communication roles, capacity and installation conditions.

KNX2004-A9
KNX Gateway

KNX2004-A9

Integrates lighting and control-device data into KNX IP systems, with the documented logic and timing functions for lighting scenes. Check KNX IP and the physical KNX TP bus separately. Provides 2 Ethernet ports, 4 serial ports, 2048-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device.

RS485 ports4 portsRS232 ports0Ethernet ports2 portsSerial ports4 ports
KNX IPOPC UA
Why this matches
  • Forwarding protocolsOPC UA

Confirm communication roles, capacity and installation conditions.