SUNFULL / PRODUCTS

Products

Find the right connection between field interfaces and system protocols.

PRODUCT FINDER

Find your connection

Select multiple protocols or enter your own. Results must meet every selected requirement.

01 / Device / acquisition protocol
1 selected
A–Z order · Search keeps list numbers

Names are from the supplied acquisition protocol list.

Showing all 579 protocols

Modbus RTU
02 / System / forwarding protocol
Select protocols · multiple
A–Z order · Search keeps list numbers

Choose forwarding protocols or database integration. Support depends on the model documentation.

Showing all 20 protocols

Select physical interfaces separately from acquisition protocols. CAN, KNX TP and two-wire MBus ports have independent counts; protocol support does not establish a physical port. USB Type-C includes power connectors; check each model's documentation for data communication support.

DDC I/O and touchscreenRefine by product type

When a touchscreen is required, results must have a built-in touchscreen and meet all I/O counts. Otherwise, positive I/O counts select DDC controllers. Counts are minimum requirements. HMI configuration support does not imply a built-in screen.

Power and wireless connectivityAdditional requirements

Checked requirements match only confirmed capabilities. Review product notes for optional modules, shared ports and power conditions.

Filters use documented product information. Unspecified capabilities are excluded. Confirm protocol roles, device models, point counts and site conditions before ordering.

129 results

Current selection conditions

Select a condition to remove it. Multiple protocols still require an AND match.

MOD2004-ARM(OPC)
Modbus gateways

MOD2004-ARM(OPC)

Exposes field-device data through Modbus interfaces for PLCs, HMI software or other Modbus clients, bringing different devices into a common data interface. Provides 2 Ethernet ports, 4 serial ports, 1024-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device. This edition also supports OPC DA acquisition.

RS485 ports4 portsRS232 ports—Ethernet ports2 portsSerial ports4 ports
All acquisition protocols for serial and Ethernet connectionsModbus RTUModbus TCPOPC UA
Why this matches
  • Acquisition protocolsModbus RTU

Confirm communication roles, capacity and installation conditions.

KNX2004-A9
KNX gateways & smart lighting modules

KNX2004-A9

Integrates lighting and control-device data into KNX IP systems, with the documented logic and timing functions for lighting scenes. Check KNX IP and the physical KNX TP bus separately. Provides 2 Ethernet ports, 4 serial ports, 2048-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device.

RS485 ports4 portsRS232 ports—Ethernet ports2 portsSerial ports4 ports
All acquisition protocols for serial and Ethernet connectionsKNX IPOPC UA
Why this matches
  • Acquisition protocolsModbus RTU

Confirm communication roles, capacity and installation conditions.

HMI2002-ARM-E
Web configuration gateways

HMI2002-ARM-E

Organizes field-device data into browser-based HMI screens for building or industrial monitoring and provides interfaces for other supervisory systems. Provides 2 Ethernet ports, 2 serial ports, 512-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device.

RS485 ports2 portsRS232 ports—Ethernet ports2 portsSerial ports2 ports
HMI configurationAll acquisition protocols for serial and Ethernet connectionsBACnetModbusMQTTDatabase
Why this matches
  • Acquisition protocolsModbus RTU

Confirm communication roles, capacity and installation conditions.

HMI2004-ARM-WiFi
Web configuration gateways

HMI2004-ARM-WiFi

Organizes field-device data into browser-based HMI screens for building or industrial monitoring and provides interfaces for other supervisory systems. Provides 2 Ethernet ports, 4 serial ports, 1024-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device. This model supports WiFi.

RS485 ports4 portsRS232 ports—Ethernet ports2 portsSerial ports4 ports
HMI configurationAll acquisition protocols for serial and Ethernet connectionsBACnetModbusMQTTDatabase
Why this matches
  • Acquisition protocolsModbus RTU

Confirm communication roles, capacity and installation conditions.

SNMP1002-ARM
SNMP gateways

SNMP1002-ARM

Collects field-device data and exposes an SNMP agent interface for equipment-status access from data-center or network-management systems. Provides 1 Ethernet port, 2 serial ports, 512-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device.

RS485 ports2 portsRS232 ports—Ethernet ports1 portsSerial ports2 ports
All acquisition protocols for serial and Ethernet connectionsSNMPOPC UA
Why this matches
  • Acquisition protocolsModbus RTU

Confirm communication roles, capacity and installation conditions.

HMI1002-Lite(NXP)
Web configuration gateways

HMI1002-Lite(NXP)

Organizes field-device data into browser-based HMI screens for building or industrial monitoring and provides interfaces for other supervisory systems. Provides 1 Ethernet port, 2 serial ports, 512-point capacity. Acquisition is limited to the OPC, Modbus and BACnet protocol families. This model supports Type-C power. This page covers the NXP edition.

RS485 ports2 portsRS232 ports—Ethernet ports1 portsSerial ports2 ports
HMI configurationListed protocol families · OPC / Modbus / BACnetBACnetModbusMQTTDatabase
Why this matches
  • Acquisition protocolsModbus RTU

Confirm communication roles, capacity and installation conditions.

IEC1002-ARM
IEC104/IEC61850 gateways

IEC1002-ARM

Converts field-device data to IEC104 or IEC61850 for integration with supervisory systems using those protocols. Provides 1 Ethernet port, 2 serial ports, 512-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device.

RS485 ports2 portsRS232 ports—Ethernet ports1 portsSerial ports2 ports
All acquisition protocols for serial and Ethernet connectionsIEC104IEC61850OPC UA
Why this matches
  • Acquisition protocolsModbus RTU

Confirm communication roles, capacity and installation conditions.

HMI1002-Lite-E
Web configuration gateways

HMI1002-Lite-E

Collect Modbus RTU device data using 1 Ethernet port, 2 RS485 ports and a 512-point capacity. Connect field devices to BACnet or Modbus supervisory systems and use the gateway’s MQTT service for building or industrial monitoring applications.

RS485 ports2 portsRS232 ports—Ethernet ports1 portsSerial ports2 ports
Listed protocols · Modbus RTUBACnetModbusMQTT
Why this matches
  • Acquisition protocolsModbus RTU

Confirm communication roles, capacity and installation conditions.

I22-1031
Web configuration touchscreens

I22-1031

web HMI touchscreen for field-data collection and local touch operation, with browser access to the monitoring project from a phone, tablet or PC. Provides 1 Ethernet port, 2048-point capacity. WiFi is optional; confirm the option when ordering.

RS485 ports3 portsRS232 ports1 portsEthernet ports1 portsSerial ports—
HMI configurationAll acquisition protocols for serial and Ethernet connectionsBACnetModbusMQTTDatabase
Why this matches
  • Acquisition protocolsModbus RTU

Confirm communication roles, capacity and installation conditions.

MOD1302-ARM
Modbus gateways

MOD1302-ARM

Exposes field-device data through Modbus interfaces for PLCs, HMI software or other Modbus clients, bringing different devices into a common data interface. Provides 1 Ethernet port, 2 serial ports, 512-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device. This is a custom edition; confirm the delivery configuration against its own document.

RS485 ports2 portsRS232 ports—Ethernet ports1 portsSerial ports2 ports
All acquisition protocols for serial and Ethernet connectionsModbus RTUModbus TCPOPC UA
Why this matches
  • Acquisition protocolsModbus RTU

Confirm communication roles, capacity and installation conditions.

BAC1001-ARM
BACnet gateways

BAC1001-ARM

Converts field-controller and meter data into BACnet interfaces for point-list-based integration with building management systems. Provides 1 Ethernet port, 1 serial port, 256-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device.

RS485 ports1 portsRS232 ports—Ethernet ports1 portsSerial ports1 ports
All acquisition protocols for serial and Ethernet connectionsBACnet/IPBACnet MS/TPOPC UA
Why this matches
  • Acquisition protocolsModbus RTU

Confirm communication roles, capacity and installation conditions.

BAC1006-Lite-E
BACnet gateways

BAC1006-Lite-E

Converts field-controller and meter data into BACnet interfaces for point-list-based integration with building management systems. Provides 1 Ethernet port, 6 serial ports, 1536-point capacity. Acquisition protocols: Modbus RTU; a Simulator driver is also included.

RS485 ports6 portsRS232 ports—Ethernet ports1 portsSerial ports6 ports
Listed protocols · Modbus RTU / SimulatorBACnet/IPBACnet MS/TPOPC UA
Why this matches
  • Acquisition protocolsModbus RTU

Confirm communication roles, capacity and installation conditions.