Connect devices. Unlock data.sales@opcmaster.com / +86 21 58776098
Sunfull — Industrial automation and connectivity
Contact
Home/Products
SUNFULL / PRODUCTS

Products

Find the right connection between field interfaces and system protocols.

PRODUCT FINDER

Find your connection

Select multiple protocols or enter your own. Results must meet every selected requirement.

01 / Device / acquisition protocol
Select protocols · multiple
A–Z order · Search keeps list numbers

Names are from the supplied acquisition protocol list.

Showing all 579 protocols

02 / System / forwarding protocol
1 selected
A–Z order · Search keeps list numbers

Names are from documented product forwarding protocols.

Showing all 19 protocols

BACnet/IP

Select physical interfaces separately from acquisition protocols. CAN, KNX TP and two-wire MBus ports have independent counts; protocol support does not establish a physical port.

DDC I/O and touchscreenRefine by product type

When a touchscreen is required, results must have a built-in touchscreen and meet all I/O counts. Otherwise, positive I/O counts select DDC controllers. Counts are minimum requirements. HMI configuration support does not imply a built-in screen.

Power and wireless connectivityAdditional requirements

Checked requirements match only confirmed capabilities. Review product notes for optional modules, shared ports and power conditions.

Filters use documented product information. Unspecified capabilities are excluded. Confirm protocol roles, device models, point counts and site conditions before ordering.

36 results

Current selection conditions

Select a condition to remove it. Multiple protocols still require an AND match.

Clear all selection conditions
BAC1006-Lite-E
BACnet Router

BAC1006-Lite-E

Converts field-controller and meter data into BACnet interfaces for point-list-based integration with building management systems. Provides 1 Ethernet port, 6 serial ports, 1536-point capacity. Acquisition protocols: Modbus RTU; a Simulator driver is also included.

RS485 ports6 portsRS232 ports0Ethernet ports1 portsSerial ports6 ports
Listed protocols · Modbus RTU / SimulatorBACnet/IPBACnet MS/TPOPC UA
Why this matches
  • Forwarding protocolsBACnet/IP

Confirm communication roles, capacity and installation conditions.

BAC1002-ARM
BACnet Router

BAC1002-ARM

Converts field-controller and meter data into BACnet interfaces for point-list-based integration with building management systems. Provides 1 Ethernet port, 2 serial ports, 512-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device.

RS485 ports2 portsRS232 ports0Ethernet ports1 portsSerial ports2 ports
Full acquisition list coverageBACnet/IPBACnet MS/TPOPC UA
Why this matches
  • Forwarding protocolsBACnet/IP

Confirm communication roles, capacity and installation conditions.

HMI1002-Lite
HMI Gateway

HMI1002-Lite

Organizes field-device data into browser-based HMI screens for building or industrial monitoring and provides interfaces for other supervisory systems. Provides 1 Ethernet port, 2 serial ports, 512-point capacity. Acquisition protocols: Modbus, BACnet; a Simulator driver is also included.

RS485 ports2 portsRS232 ports0Ethernet ports1 portsSerial ports2 ports
HMI configurationBACnet/IPBACnetModbus
Why this matches
  • Forwarding protocolsBACnet/IP

Confirm communication roles, capacity and installation conditions.

BAC2004-A9
BACnet Router

BAC2004-A9

Converts field-controller and meter data into BACnet interfaces for point-list-based integration with building management systems. Provides 2 Ethernet ports, 4 serial ports, 2048-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device.

RS485 ports4 portsRS232 ports0Ethernet ports2 portsSerial ports4 ports
BACnet/IPBACnet MS/TPOPC UA
Why this matches
  • Forwarding protocolsBACnet/IP

Confirm communication roles, capacity and installation conditions.

BAC2304-ARM
Customized products

BAC2304-ARM

Converts field-controller and meter data into BACnet interfaces for point-list-based integration with building management systems. Provides 2 Ethernet ports, 4 serial ports, 1024-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device. This is a custom edition; confirm the delivery configuration against its own document.

RS485 ports4 portsRS232 ports0Ethernet ports2 portsSerial ports4 ports
BACnet/IPBACnet MS/TPOPC UA
Why this matches
  • Forwarding protocolsBACnet/IP

Confirm communication roles, capacity and installation conditions.

BAC1002-ARM(NXP)
BACnet Router

BAC1002-ARM(NXP)

Converts field-controller and meter data into BACnet interfaces for point-list-based integration with building management systems. Provides 1 Ethernet port, 2 serial ports, 512-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device. This model supports Type-C power. This page covers the NXP edition.

RS485 ports2 portsRS232 ports0Ethernet ports1 portsSerial ports2 ports
BACnet/IPBACnet MS/TPOPC UA
Why this matches
  • Forwarding protocolsBACnet/IP

Confirm communication roles, capacity and installation conditions.

RT5001-WiFi-4G
Gateway-Type Remote Networking Router

RT5001-WiFi-4G

Combines VPN networking and a protocol gateway for remote PLC/touchscreen project maintenance and field-data integration. This edition provides WiFi and 4G communications. Provides 5 Ethernet ports, 1 serial port, 256-point capacity. This model supports 4G. This model supports WiFi.

RS485 ports1 portsRS232 ports0Ethernet ports5 portsSerial ports1 ports
HMI configurationBACnet/IPModbus TCPMQTT
Why this matches
  • Forwarding protocolsBACnet/IP

Confirm communication roles, capacity and installation conditions.

BAC2002-ARM-E
BACnet Router

BAC2002-ARM-E

Converts field-controller and meter data into BACnet interfaces for point-list-based integration with building management systems. Provides 2 Ethernet ports, 2 serial ports, 512-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device.

RS485 ports2 portsRS232 ports0Ethernet ports2 portsSerial ports2 ports
BACnet/IPBACnet MS/TPOPC UA
Why this matches
  • Forwarding protocolsBACnet/IP

Confirm communication roles, capacity and installation conditions.

Router1001-ARM-E(Type-C)
BACnet Router

Router1001-ARM-E(Type-C)

Transparently routes between BACnet MS/TP buses and BACnet/IP networks, connecting MS/TP DDCs or valve controllers to building Ethernet. Provides 1 Ethernet port, 1 serial port. Acquisition protocols: BACnet MS/TP. Type-C power is optional; confirm the option when ordering.

RS485 ports0RS232 ports0Ethernet ports1 portsSerial ports1 ports
Listed protocols · BACnet MS/TPBACnet/IP
Why this matches
  • Forwarding protocolsBACnet/IP

Confirm communication roles, capacity and installation conditions.

BAC2004-ARM
BACnet Router

BAC2004-ARM

Converts field-controller and meter data into BACnet interfaces for point-list-based integration with building management systems. Provides 2 Ethernet ports, 4 serial ports, 1024-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device.

RS485 ports4 portsRS232 ports0Ethernet ports2 portsSerial ports4 ports
BACnet/IPBACnet MS/TPOPC UA
Why this matches
  • Forwarding protocolsBACnet/IP

Confirm communication roles, capacity and installation conditions.

BAC1001-Lite-E
BACnet Router

BAC1001-Lite-E

Converts field-controller and meter data into BACnet interfaces for point-list-based integration with building management systems. Provides 1 Ethernet port, 1 serial port, 256-point capacity. Acquisition protocols: Modbus RTU; a Simulator driver is also included.

RS485 ports1 portsRS232 ports0Ethernet ports1 portsSerial ports1 ports
Listed protocols · Modbus RTU / SimulatorBACnet/IPBACnet MS/TPOPC UA
Why this matches
  • Forwarding protocolsBACnet/IP

Confirm communication roles, capacity and installation conditions.