PROFINET / S7 gateways

PFN1001-MBus

Integrates water, heat and other meter data into Siemens S7 systems. Configure the MBus wiring, acquisition driver and supply for the selected edition. Select the matching hardware edition below.

Built-in touchscreen—

HMI configuration—

USB Type-C power—

4G connectivity—

WiFi—

LoRaWAN—

Model notes · Multiple hardware versions share this model name. Check the matching datasheet; specifications from different versions have not been combined.

Start using this model

Review the model documents, then prepare the files needed for connection and commissioning.

PFN1001-MBus

No related files are listed in this language. Contact technical support to confirm the documents you need.

General commissioning guide

Connection, point mapping, live-value checks and troubleshooting.

View general steps Confirm required files

Connection and configuration preparation

Review how devices connect, then prepare the field point list and supporting files.

01
Field devices
- Confirm the driver against the device brand, full model and communication documentation
02
Device-side acquisition
- To confirm
03
PFN1001-MBus
- Interface details to confirm
04
System-side forwarding
- To confirm
05
Compatible system types
- To confirm

Arrows show connection order. Check model wiring instructions and the project point list for terminals, port assignments and read/write directions.

Communication roles

Acquisition side: Not specified in the records; verify against the field device and supervisory system
Forwarding side: Not specified in the records; verify against the field device and supervisory system

Recorded capacity

Capacity to confirm

Check before connecting

Check the device brand, model, driver version and interface. Use the wiring diagram to confirm terminals and port assignments.
Prepare a point list with addresses or objects, data types, byte order, units and read/write permissions.
Confirm the role at each end and the device address, serial settings, or IP address and port.
Check point count, device count and physical port count separately, then confirm capacity for the actual data volume.

Files for configuration

Model documentsNo dedicated file listed
Request
User manualNo dedicated file listed
Request
Wiring diagramNo dedicated file listed
Request
Configuration tools and supporting filesNo dedicated file listed
Request

Statuses reflect files associated in the current language. Contact technical support with this model to confirm other supporting resources.

How to choose within a series

Match device-side protocols and the host system first, then check ports, wireless connections and capacity. Candidates below use confirmed model specifications.

Current model groupPFN1001

You need multiple serial and Ethernet protocols

Check models confirmed to cover all acquisition protocols for serial and Ethernet connections. Check protocol scope and physical port counts separately. Confirm dedicated CAN, KNX TP and 2-wire MBus connections for the specific model.

Confirmed candidates1 models

PFN1001-ARM
All serial and Ethernet acquisition protocols
Forwarding: S7 / OPC UA

View full group specifications

Acquisition scope needs confirmation

These models have no listed acquisition scope suitable for this decision. Check their model notes and provide device make, model and protocol documentation.

Models to verify1 models

PFN1001-MBus
Acquisition scope unconfirmed
Forwarding protocols unconfirmed

View full group specifications

This guidance narrows the candidates. Confirm communication roles, read/write direction, the point list, wiring and model-specific resources before final selection.

“Unconfirmed” means documentation does not establish a value; it does not mean zero or unsupported.

Overview & technical information Selection checklist FAQ (1)Related content

Product overview

Integrates water, heat and other meter data into Siemens S7 systems. Configure the MBus wiring, acquisition driver and supply for the selected edition. Select the matching hardware edition below.

Key functions

Data-format processing

Supports linear scaling, bit extraction and byte-order conversion to handle different device data formats.

Scripts and triggers

Use JS scripts and triggers for required control logic alongside the configured communication points.

Point-list configuration

Configure acquisition and forwarding mappings from the field point list, then upload the project for supervisory-system access.

Typical applications

Lighting-device connectivity and management; Field-meter data integration.

Model selection essentials

This model has multiple hardware editions; confirm the processor, supply and port configuration when ordering.

Current product specifications

This model has multiple documented hardware versions. Choose the matching version below; a single specification set has not been assumed.

PFN1001-MBus — MBus to Siemens S7 gateway (standard power edition) · Chinese PDF

Current product specifications

Specifications are sourced from the supplied 2026 product catalog. Unspecified values remain unconfirmed.

Parameter	Specification
Total serial ports	1
RS485 ports	1
Ethernet ports	1
Point capacity	256
Acquisition protocols	MBus_WaterMeter / MBus_EnergyMeter_EN / MBus_EnergyMeter / Modbus RTU / Modbus TCP / DLT645-1997/2007 / Simulator
Forwarding protocols	OPC UA / S7
Physical interfaces	Ethernet / RS485

Model datasheets

File unavailable in this language

PFN1001-MBus — MBus to Siemens S7 gateway (DC 24 V edition) · Chinese PDF

Current product specifications

Specifications are sourced from the supplied 2026 product catalog. Unspecified values remain unconfirmed.

Parameter	Specification
Total serial ports	1
RS485 ports	1
Ethernet ports	1
Point capacity	256
Acquisition protocols	MBus_WaterMeter / MBus_EnergyMeter_EN / MBus_EnergyMeter / Modbus RTU / Modbus TCP / DLT645-1997/2007 / Simulator
Forwarding protocols	OPC UA / S7
Physical interfaces	Ethernet / RS485

Model datasheets

File unavailable in this language

Selection checklist

Confirm before selecting

Protocol compatibility is the first step. Check the device model, communication roles, point count and wiring. Capabilities that are not documented require confirmation.

Not yet documented：Acquisition protocols / Forwarding protocols / Physical interfaces / Acquisition roles / Output roles / Point capacity / Device capacity / Serial ports / Ethernet ports / RS485 ports / RS232 ports / CAN ports / KNX TP ports / Two-wire MBus ports / DI digital inputs / DO digital outputs / AI analog inputs / AO analog outputs / USB Type-C power / 4G connectivity / WiFi / LoRaWAN / HMI configuration / Built-in touchscreen / Product type

Continue filtering and comparing

Related FAQs

Find configuration and usage guidance linked to this content. Refer to documentation for the exact model and version.

What does X mean, and how do acquisition and forwarding protocols differ?

X denotes the acquisition-side protocols. Also check forwarding protocols, communication roles, physical interface types and port counts.

Read the full answer

PFN1001-MBus

Start using this model

General commissioning guide

Field devices

Device-side acquisition

PFN1001-MBus

System-side forwarding

Compatible system types

Communication roles

Recorded capacity

Check before connecting

Files for configuration

How to choose within a series

You need multiple serial and Ethernet protocols

Acquisition scope needs confirmation

Product overview

Key functions

Data-format processing

Scripts and triggers

Point-list configuration

Typical applications

Model selection essentials

Current product specifications

PFN1001-MBus — MBus to Siemens S7 gateway (standard power edition) · Chinese PDF

Current product specifications

Model datasheets

PFN1001-MBus — MBus to Siemens S7 gateway (DC 24 V edition) · Chinese PDF

Current product specifications

Model datasheets

Selection checklist

Related FAQs

Related content

PFN2004-ARM

PFN1011-MBus

PFN1002-ARM

Your next connection starts here.