Product overview
Integrates field-device data into EtherNet/IP systems for connection to PLCs or supervisory platforms using that protocol. Provides 2 Ethernet ports, 4 serial ports, 1024-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device.
Key functions
Scripts and triggers
Use JS scripts and triggers for required control logic alongside the configured communication points.
Simulation before deployment
Simulate and verify the project on a PC before uploading it to the hardware gateway to check communication settings.
Point-list configuration
Configure acquisition and forwarding mappings from the field point list, then upload the project for supervisory-system access.
Connections and integration
System-side interfaces: EtherNet/IP, OPC UA. Configure the documented acquisition protocols so supervisory systems can access field data through these interfaces.
Typical applications
Lighting-device connectivity and management; Field-meter data integration.
Model selection essentials
- Model configuration: 2 Ethernet ports, 4 RS485 channels, 1024 points, 128 devices.
Current product specifications
Specifications are sourced from the supplied 2026 product catalog. Unspecified values remain unconfirmed.
| Parameter | Specification |
|---|---|
| Total serial ports | 4 |
| RS485 ports | 4 |
| Ethernet ports | 2 |
| Point capacity | 1024 |
| Device capacity | 128 |
| Forwarding protocols | OPC UA / EtherNet/IP |
| Physical interfaces | Ethernet / RS485 |
Model notes: Supported acquisition protocols: more than 500 protocols.
Model datasheets
- File unavailable in this language
