Product overview
Exposes field-device data through Modbus interfaces for PLCs, HMI software or other Modbus clients, bringing different devices into a common data interface. Provides 2 Ethernet ports, 4 serial ports, 1024-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device. This edition also supports OPC DA acquisition.
Key functions
Serial-to-Ethernet routing
Supports transparent transport from a Modbus RTU bus to a Modbus TCP network for Ethernet access to serial devices.
Data-format processing
Supports linear scaling, bit extraction and byte-order conversion to handle different device data formats.
Scripts and triggers
Use JS scripts and triggers for required control logic alongside the configured communication points.
Web monitoring and operation
Use built-in web pages to view, configure and monitor device data during commissioning and operation.
Point-list configuration
Configure acquisition and forwarding mappings from the field point list, then upload the project for supervisory-system access.
Connections and integration
Acquisition covers all serial and Ethernet protocols in the reviewed list. Existing explicit support for OPC DA is retained. System-side interfaces: Modbus RTU, Modbus TCP, OPC UA. Configure the device roles and point mappings for the installation.
Typical applications
Lighting-device connectivity and management; Field-meter data integration.
Model selection essentials
- Model configuration: 2 Ethernet ports, 4 RS485 channels, 1024 points, 128 devices.
Current product specifications
Specifications are sourced from the supplied 2026 product catalog. Unspecified values remain unconfirmed.
| Parameter | Specification |
|---|---|
| Total serial ports | 4 |
| RS485 ports | 4 |
| Ethernet ports | 2 |
| Point capacity | 1024 |
| Device capacity | 128 |
| Acquisition protocols | All serial and Ethernet protocols in the reviewed list; existing explicit support for OPC DA is retained |
| Forwarding protocols | Modbus RTU / Modbus TCP / OPC UA |
| Physical interfaces | Ethernet / RS485 |
The serial/Ethernet acquisition scope above follows the model confirmation on 2026-10-02. Existing explicit protocol support and specialized interfaces are retained; verify actual hardware interfaces and communication roles separately.
Model notes: Supported acquisition protocols: more than 500 protocols. OPC DA acquisition is supported.
Model datasheets
- File unavailable in this language
