Product overview

Integrates lighting and control-device data into KNX IP systems, with the documented logic and timing functions for lighting scenes. Check KNX IP and the physical KNX TP bus separately. Provides 1 Ethernet port, 2 serial ports, 512-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device. This model supports Type-C power. This is a custom edition; confirm the delivery configuration against its own document.

Key functions

Scripts and triggers

Use JS scripts and triggers for required control logic alongside the configured communication points.

Simulation before deployment

Simulate and verify the project on a PC before uploading it to the hardware gateway to check communication settings.

Point-list configuration

Configure acquisition and forwarding mappings from the field point list, then upload the project for supervisory-system access.

Connections and integration

System-side interfaces: KNX IP, OPC UA. Configure the documented acquisition protocols so supervisory systems can access field data through these interfaces.

Typical applications

Lighting-device connectivity and management; Field-meter data integration.

Model selection essentials

  • Model configuration: 1 Ethernet port, 2 RS485 channels, 512 points, 64 devices.
  • This model supports USB Type-C power.

Current product specifications

Specifications are sourced from the supplied 2026 product catalog. Unspecified values remain unconfirmed.

ParameterSpecification
Total serial ports2
RS485 ports2
Ethernet ports1
Point capacity512
Device capacity64
Forwarding protocolsOPC UA / KNX IP
Physical interfacesEthernet / RS485
Type-C powerSupported

Model notes: Supported acquisition protocols: more than 500 protocols.

Model datasheets

  • File unavailable in this language