Find the right connection between field interfaces and system protocols.
Filters use documented product information. Unspecified capabilities are excluded. Confirm protocol roles, device models, point counts and site conditions before ordering.
Select a condition to remove it. Multiple protocols still require an AND match.
Integrates water, heat and other meter data into MQTT systems. Configure the MBus wiring, acquisition driver and supply for the selected edition. Provides 1 Ethernet port, 1 serial port, 1 two-wire MBus port. Select the matching hardware edition below.
Transparently connects Modbus RTU serial buses to a Modbus TCP network without per-point mapping; clients distinguish buses and devices by port and station address. Provides 1 Ethernet port, 2 serial ports. Acquisition covers all serial and Ethernet protocols in the reviewed list. Existing explicit support for Modbus RTU is retained.
Provides bidirectional transparent transport between KNX TP and RS485 for host, HMI or gateway access to lighting and building sensors or actuators.
Supports field-data acquisition and MQTT integration, with acquisition and forwarding configured from the device point list to connect serial or network devices to supervisory platforms. Provides 1 Ethernet port, 6 serial ports, 1536-point capacity. Acquisition protocols: Modbus RTU, Modbus TCP; a Simulator driver is also included.
Supports field-data acquisition and MQTT integration, with acquisition and forwarding configured from the device point list to connect serial or network devices to supervisory platforms. Provides 1 Ethernet port, 1 serial port, 256-point capacity. Acquisition protocols: Modbus RTU, Modbus TCP; a Simulator driver is also included. This model supports WiFi.
Exposes field-device data through Modbus interfaces for PLCs, HMI software or other Modbus clients, bringing different devices into a common data interface. Provides 2 Ethernet ports, 4 serial ports, 1024-point capacity. Acquisition protocols: Modbus, BACnet; a Simulator driver is also included.
Integrates lighting and control-device data into KNX IP systems, with the documented logic and timing functions for lighting scenes. Check KNX IP and the physical KNX TP bus separately. Provides 1 Ethernet port, 2 serial ports, 512-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device. This model supports Type-C power.
Integrates field-device data into BACnet/SC secure-communication networks, with BACnet MS/TP and OPC UA interfaces for building projects requiring BACnet/SC integration. Provides 2 Ethernet ports, 4 serial ports, 1024-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device.
Integrates water, heat and other meter data into Siemens S7 systems. Configure the MBus wiring, acquisition driver and supply for the selected edition. Provides 1 Ethernet port, 1 serial port, 1 two-wire MBus port. Select the matching hardware edition below.
Exposes field-device data through Modbus interfaces for PLCs, HMI software or other Modbus clients, bringing different devices into a common data interface. Provides 1 Ethernet port, 2 serial ports, 512-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device. This model supports Type-C power. This page covers the NXP edition.
Integrates field-device data into EtherNet/IP systems for connection to PLCs or supervisory platforms using that protocol. Provides 2 Ethernet ports, 4 serial ports, 2048-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device.
Collects, bills, stores and classifies water, electricity, gas and heating/cooling energy data, with time-of-use electricity records and charts for reviewing building or equipment consumption. Provides 1 Ethernet port, 4 serial ports, 1024-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device.
