SUNFULL / PRODUCTS

Products

Find the right connection between field interfaces and system protocols.

PRODUCT FINDER

Find your connection

Select multiple protocols or enter your own. Results must meet every selected requirement.

01 / Device / acquisition protocol
Select protocols · multiple
A–Z order · Search keeps list numbers

Names are from the supplied acquisition protocol list.

Showing all 579 protocols

02 / System / forwarding protocol
Select protocols · multiple
A–Z order · Search keeps list numbers

Choose forwarding protocols or database integration. Support depends on the model documentation.

Showing all 20 protocols

Select physical interfaces separately from acquisition protocols. CAN, KNX TP and two-wire MBus ports have independent counts; protocol support does not establish a physical port. USB Type-C includes power connectors; check each model's documentation for data communication support.

DDC I/O and touchscreenRefine by product type

When a touchscreen is required, results must have a built-in touchscreen and meet all I/O counts. Otherwise, positive I/O counts select DDC controllers. Counts are minimum requirements. HMI configuration support does not imply a built-in screen.

Power and wireless connectivityAdditional requirements

Checked requirements match only confirmed capabilities. Review product notes for optional modules, shared ports and power conditions.

Filters use documented product information. Unspecified capabilities are excluded. Confirm protocol roles, device models, point counts and site conditions before ordering.

68 results

Current selection conditions

Select a condition to remove it. Multiple protocols still require an AND match.

HMI1002-ARM-4G
Web configuration gateways

HMI1002-ARM-4G

Organizes field-device data into browser-based HMI screens for building or industrial monitoring and provides interfaces for other supervisory systems. Provides 1 Ethernet port, 2 serial ports, 512-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device. This model supports 4G.

RS485 ports2 portsRS232 ports—Ethernet ports1 portsSerial ports2 ports
HMI configurationAll acquisition protocols for serial and Ethernet connectionsBACnetModbusMQTTDatabase
MB1001-ARM-E
Modbus routers

MB1001-ARM-E

Transparently connects Modbus RTU serial buses to a Modbus TCP network without per-point mapping; clients distinguish buses and devices by port and station address. Provides 1 Ethernet port, 1 serial port. Acquisition covers all serial and Ethernet protocols in the reviewed list. Existing explicit support for Modbus RTU is retained.

RS485 ports1 portsRS232 ports—Ethernet ports1 portsSerial ports1 ports
All acquisition protocols for serial and Ethernet connectionsModbus TCP
C2M2004-ARM
Modbus gateways

C2M2004-ARM

Integrates Carrier CCN air-conditioning units into a Modbus supervisory system, with one unit per COM port and up to four units in total. Provides 2 Ethernet ports, 4 serial ports, 1024-point capacity. Acquisition covers all serial and Ethernet protocols in the reviewed list. Existing explicit support for CCN is retained.

RS485 ports4 portsRS232 ports—Ethernet ports2 portsSerial ports4 ports
All acquisition protocols for serial and Ethernet connectionsModbus RTUModbus TCPOPC UA
PFN1024-ARM
PROFINET / S7 gateways

PFN1024-ARM

Converts field-device data to Profinet and OPC UA for integration with Profinet control systems and supervisory platforms, using X2Profinet to configure points and device communications. Provides 3 Ethernet ports, 4 serial ports, 1024-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device.

RS485 ports4 portsRS232 ports—Ethernet ports3 portsSerial ports4 ports
All acquisition protocols for serial and Ethernet connectionsProfinetOPC UA
HMI1302-ARM-4G
Web configuration gateways

HMI1302-ARM-4G

Organizes field-device data into browser-based HMI screens for building or industrial monitoring and provides interfaces for other supervisory systems. Provides 1 Ethernet port, 2 serial ports, 512-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device. This model supports 4G. This is a custom edition; confirm the delivery configuration against its own document.

RS485 ports2 portsRS232 ports—Ethernet ports1 portsSerial ports2 ports
HMI configurationAll acquisition protocols for serial and Ethernet connectionsBACnetModbusMQTTDatabase