Explore model variants side by side. Compare acquisition scope, forwarding protocols and physical ports, then open a model for its full specifications and documents.
1 matching models · 219 in the catalog
Showing 1–1 of 1Match device-side protocols and the host system first, then check ports, wireless connections and capacity. Candidates below use confirmed model specifications.
These models have no listed acquisition scope suitable for this decision. Check their model notes and provide device make, model and protocol documentation.
Acquisition scope unconfirmed
Forwarding protocols unconfirmed
This guidance narrows the candidates. Confirm communication roles, read/write direction, the point list, wiring and model-specific resources before final selection.
“Unconfirmed” means documentation does not establish a value; it does not mean zero or unsupported.
| ModelDevice acquisition → System forwarding | |
|---|---|
| 01Acquisition scopeDevice side | — |
| 02Forwarding protocolsSystem side | — |
| Ethernet ports | 1 |
| Total serial ports | — |
| RS485 | — |
| RS232 | — |
| CAN ports | — |
| KNX TP ports | — |
| Two-wire MBus ports | 1 |
| DI channels | — |
| DO channels | — |
| AI channels | — |
| AO channels | — |
| Touchscreen | — |
| Model documents | Port and model notes1 Ethernet port and 1 native two-wire MBus port (M+ and M-). Use a 24 V supply when connecting two-wire MBus meters. MBus terminals are not RS485 A+/B- terminals and must not be interchanged. This MBus port is separate from ordinary RS485/RS232 serial ports; undocumented ordinary serial-port quantities remain unconfirmed. Check each power edition for its other specifications. Multiple hardware versions share this model name. Check the matching datasheet; specifications from different versions have not been combined. |
0 means no such interface; — means the specification is unconfirmed.
1 Ethernet port and 1 native two-wire MBus port (M+ and M-). Use a 24 V supply when connecting two-wire MBus meters. MBus terminals are not RS485 A+/B- terminals and must not be interchanged. This MBus port is separate from ordinary RS485/RS232 serial ports; undocumented ordinary serial-port quantities remain unconfirmed. Check each power edition for its other specifications.
Multiple hardware versions share this model name. Check the matching datasheet; specifications from different versions have not been combined.
“—” means the documentation does not establish a value; 0 is a confirmed zero. Check model documentation for shared ports, options and protocol roles.
