Modbus gateways

MOD1002-ARM(NXP)

Exposes field-device data through Modbus interfaces for PLCs, HMI software or other Modbus clients, bringing different devices into a common data interface. Provides 1 Ethernet port, 2 serial ports, 512-point capacity. Acquisition covers more than 500 protocols; check the driver against each connected device. This model supports Type-C power. This page covers the NXP edition.

Serial ports2

RS485 ports2

Ethernet ports1

Acquisition protocol coverageAll acquisition protocols for serial and Ethernet connections

Forwarding protocolsModbus RTU / Modbus TCP / OPC UA

Physical interfacesEthernet / RS485

Point capacity512

Device capacity64

Built-in touchscreen—

HMI configuration—

USB Type-C powerSupported

4G connectivity—

WiFi—

LoRaWAN—

Model notes · Supported acquisition protocols: more than 500 protocols.

Start using this model

Review the model documents, then prepare the files needed for connection and commissioning.

MOD1002-ARM(NXP)

No related files are listed in this language. Contact technical support to confirm the documents you need.

General commissioning guide

Connection, point mapping, live-value checks and troubleshooting.

View general steps Confirm required files

Connection and configuration preparation

Review how devices connect, then prepare the field point list and supporting files.

01
Field devices
- Confirm the driver against the device brand, full model and communication documentation
02
Device-side acquisition
- All listed acquisition protocols for serial and Ethernet
03
MOD1002-ARM(NXP)
- Ethernet × 1
- RS485 × 2
04
System-side forwarding
- Modbus RTU
- Modbus TCP
- OPC UA
05
Compatible system types
- Modbus system
- OPC system

Arrows show connection order. Check model wiring instructions and the project point list for terminals, port assignments and read/write directions.

Communication roles

Acquisition side: Not specified in the records; verify against the field device and supervisory system
Forwarding side: Not specified in the records; verify against the field device and supervisory system

Recorded capacity

512 points / 64 devices

Check before connecting

Check the device brand, model, driver version and interface. Use the wiring diagram to confirm terminals and port assignments.
Prepare a point list with addresses or objects, data types, byte order, units and read/write permissions.
Confirm the role at each end and the device address, serial settings, or IP address and port.
Check point count, device count and physical port count separately, then confirm capacity for the actual data volume.

Files for configuration

Model documentsNo dedicated file listed
Request
User manualNo dedicated file listed
Request
Wiring diagramNo dedicated file listed
Request
Configuration tools and supporting filesNo dedicated file listed
Request

Statuses reflect files associated in the current language. Contact technical support with this model to confirm other supporting resources.

How to choose within a series

Match device-side protocols and the host system first, then check ports, wireless connections and capacity. Candidates below use confirmed model specifications.

Current model groupMOD1002

You need multiple serial and Ethernet protocols

Check models confirmed to cover all acquisition protocols for serial and Ethernet connections. Check protocol scope and physical port counts separately. Confirm dedicated CAN, KNX TP and 2-wire MBus connections for the specific model.

Confirmed candidates2 models

MOD1002-ARM
All serial and Ethernet acquisition protocols
Forwarding: Modbus RTU / Modbus TCP / OPC UA
MOD1002-ARM(NXP)
All serial and Ethernet acquisition protocols
Forwarding: Modbus RTU / Modbus TCP / OPC UA

View full group specifications

The device protocol is fixed

Check each model’s listed acquisition protocols and the required host-system protocol. A model suffix alone does not establish equivalent acquisition capability.

Confirmed candidates2 models

MOD1002-Lite
Listed acquisition protocols: Modbus / BACnet
Forwarding: Modbus RTU / Modbus TCP / OPC UA
MOD1002-Lite-E
Listed acquisition protocols: Modbus RTU
Forwarding: Modbus RTU / Modbus TCP / OPC UA

View full group specifications

Acquisition scope needs confirmation

These models have no listed acquisition scope suitable for this decision. Check their model notes and provide device make, model and protocol documentation.

Models to verify1 models

MOD1002-MBus
Acquisition scope unconfirmed
Forwarding protocols unconfirmed

View full group specifications

This guidance narrows the candidates. Confirm communication roles, read/write direction, the point list, wiring and model-specific resources before final selection.

“Unconfirmed” means documentation does not establish a value; it does not mean zero or unsupported.

Overview & technical information Selection checklist FAQ (1)Related content

Product overview

Key functions

Serial-to-Ethernet routing

Supports transparent transport from a Modbus RTU bus to a Modbus TCP network for Ethernet access to serial devices.

Data-format processing

Supports linear scaling, bit extraction and byte-order conversion to handle different device data formats.

Scripts and triggers

Use JS scripts and triggers for required control logic alongside the configured communication points.

Web monitoring and operation

Use built-in web pages to view, configure and monitor device data during commissioning and operation.

Point-list configuration

Configure acquisition and forwarding mappings from the field point list, then upload the project for supervisory-system access.

Connections and integration

System-side interfaces: Modbus RTU, Modbus TCP, OPC UA. Configure the documented acquisition protocols so supervisory systems can access field data through these interfaces.

Typical applications

Lighting-device connectivity and management; Field-meter data integration.

Model selection essentials

Model configuration: 1 Ethernet port, 2 RS485 channels, 512 points, 64 devices.
This model supports USB Type-C power.

Current product specifications

Specifications are sourced from the supplied 2026 product catalog. Unspecified values remain unconfirmed.

Parameter	Specification
Total serial ports	2
RS485 ports	2
Ethernet ports	1
Point capacity	512
Device capacity	64
Forwarding protocols	Modbus RTU / Modbus TCP / OPC UA
Physical interfaces	Ethernet / RS485
Type-C power	Supported

Model notes: Supported acquisition protocols: more than 500 protocols.

Model datasheets

File unavailable in this language

Selection checklist

Why this matches

Acquisition protocolsModbus RTU

Confirm before selecting

Protocol compatibility is the first step. Check the device model, communication roles, point count and wiring. Capabilities that are not documented require confirmation.

Not yet documented：Acquisition roles / Output roles / RS232 ports / CAN ports / KNX TP ports / Two-wire MBus ports / DI digital inputs / DO digital outputs / AI analog inputs / AO analog outputs / 4G connectivity / WiFi / LoRaWAN / HMI configuration / Built-in touchscreen / Product type

View parameter evidence

Acquisition protocols · Modbus RTUModel rule confirmation (2026-10-02) · 2026-10-02

Continue filtering and comparing

Related FAQs

Find configuration and usage guidance linked to this content. Refer to documentation for the exact model and version.

What does X mean, and how do acquisition and forwarding protocols differ?

X denotes the acquisition-side protocols. Also check forwarding protocols, communication roles, physical interface types and port counts.

Read the full answer

MOD1002-ARM(NXP)

Start using this model

General commissioning guide

Field devices

Device-side acquisition

MOD1002-ARM(NXP)

System-side forwarding

Compatible system types

Communication roles

Recorded capacity

Check before connecting

Files for configuration

How to choose within a series

You need multiple serial and Ethernet protocols

The device protocol is fixed

Acquisition scope needs confirmation

Product overview

Key functions

Serial-to-Ethernet routing

Data-format processing

Scripts and triggers

Web monitoring and operation

Point-list configuration

Connections and integration

Typical applications

Model selection essentials

Current product specifications

Model datasheets

Selection checklist

Related FAQs

Related content

MOD1001-MBus

MOD2004-ARM

MOD1002-Lite

Your next connection starts here.