Explore model variants side by side. Compare acquisition scope, forwarding protocols and physical ports, then open a model for its full specifications and documents.
Match device-side protocols and the host system first, then check ports, wireless connections and capacity. Candidates below use confirmed model specifications.
Current model groupHMI2004
You need multiple serial and Ethernet protocols
Check models confirmed to cover all acquisition protocols for serial and Ethernet connections. Check protocol scope and physical port counts separately. Confirm dedicated CAN, KNX TP and 2-wire MBus connections for the specific model.
Check each model’s listed acquisition protocols and the required host-system protocol. A model suffix alone does not establish equivalent acquisition capability.
These models have no listed acquisition scope suitable for this decision. Check their model notes and provide device make, model and protocol documentation.
This guidance narrows the candidates. Confirm communication roles, read/write direction, the point list, wiring and model-specific resources before final selection.
“Unconfirmed” means documentation does not establish a value; it does not mean zero or unsupported.
All acquisition protocols for serial and Ethernet connections
All acquisition protocols for serial and Ethernet connections
All acquisition protocols for serial and Ethernet connections
All acquisition protocols for serial and Ethernet connections
02Forwarding protocolsSystem side
Database
BACnetModbusMQTTDatabase
Show 1 more
OPC UA
BACnetModbusMQTTDatabase
Show 1 more
OPC UA
BACnetModbusMQTTDatabase
Show 1 more
OPC UA
Point capacity
2048
2048
4096
2048
Device capacity
128
128
128
128
Ethernet ports
2
2
2
2
Total serial ports
4
4
4
4
RS485
4
4
4
4
RS232
—
—
—
—
CAN ports
—
—
—
—
KNX TP ports
—
—
—
—
Two-wire MBus ports
—
—
—
—
DI channels
—
—
—
—
DO channels
—
—
—
—
AI channels
—
—
—
—
AO channels
—
—
—
—
Touchscreen
—
—
—
—
Model documents
Port and model notes
Filters use only specifications explicitly shared by every hardware edition listed here. Check the matching document below for processor, power and other edition-specific differences.
All acquisition protocols for serial and Ethernet connections
02Forwarding protocolsSystem side
Database
Point capacity
2048
Device capacity
128
Ethernet ports
2
Total serial ports
4
RS485
4
All specifications
0 means no such interface; — means the specification is unconfirmed.
Point capacity
2048
Device capacity
128
Ethernet ports
2
Total serial ports
4
RS485
4
RS232
—
CAN ports
—
KNX TP ports
—
Two-wire MBus ports
—
DI channels
—
DO channels
—
AI channels
—
AO channels
—
Touchscreen
—
Port and model notes
Filters use only specifications explicitly shared by every hardware edition listed here. Check the matching document below for processor, power and other edition-specific differences.