Product overview

Configure the device point list in X2View and upload the project to the gateway. The documented acquisition scope is Modbus RTU, Modbus TCP and Simulator; a broad acquisition list should not be assumed from the HMI model prefix.

Selection and reading guide

  • First check the field-device protocol against the listed Modbus RTU, Modbus TCP and Simulator acquisition scope on page 2.
  • Before mapping points, read the Modbus address-base notes on page 3; acquisition decimal/hexadecimal addresses and forwarding addresses use different stated bases.

Model document guide

  • File unavailable in this language; purpose and functions: page 3; specification references: pages 2, 3, 5

Current product specifications

Specifications are sourced from the supplied 2026 product catalog. Unspecified values remain unconfirmed.

ParameterSpecification
Total serial ports2
RS485 ports2
Ethernet ports1
Point capacity512
Device capacity64
Acquisition protocolsModbus RTU / Modbus TCP / Simulator
Forwarding protocolsBACnet / Modbus / MQTT / OPC UA
Acquisition rolesModbus RTU Client / Modbus TCP Client
Forwarding rolesBACnet Server / Modbus Server / MQTT Server / OPC UA Server
Physical interfacesEthernet / RS485

Model datasheets

  • File unavailable in this language