
Equipment-room leak detection and alarm integration
A locating leak controller and sensing cable report alarms and leak locations to a monitoring host through the RS485 and RS232 interface path described in the original proposal.
Application solutions for buildings, lighting, industry, agriculture, power and data centers.
This content is not yet available in the selected language

A locating leak controller and sensing cable report alarms and leak locations to a monitoring host through the RS485 and RS232 interface path described in the original proposal.

Three X2BACnet gateways collected Modbus electricity-meter data over RS485 and provided BACnet/IP data to Johnson Controls NAE controllers for Metasys monitoring.

A hardware gateway connected a T-Master 2.11 controller to a Modbus RTU touchscreen, enabling different temperature and humidity setpoints during the day and at night.

A documented proposal combining HMI2004-A9 gateways with a local energy platform for hospital metering and monitoring; no quantified acceptance or energy-saving result is supplied.

An aluminum manufacturer in Anqing used HMI1001-ARM-4G for production-equipment data collection and municipal-platform integration where no dedicated network had been planned.

Three HMI2004-Lite gateways collected Modbus RTU data from 14 Haier VRV groups and exposed BACnet/IP. The source records local HMI use while the BA network connection remained pending.

-2 RS485,1 RJ45; -Configuration by Website;